Amarinth has completed a US$1.5 million order from Armada Madura for six API 610 VS4 vertical pumps for a new FPSO being constructed for India’s Oil and Natural Gas Corporation Limited (ONGC).
One of the Amarinth 18m lengthy API 610 VS4 pumps for the Armada Madura FPSO in assembly – Image: Amarinth.
เกจวัดแรงดันลมคือ of the six API 610 VS4 pumps are pour level depressant pumps that are 18m in length and the other 4 are methanol raise pumps that are 10m lengthy.
All of the pumps have PT100 temperature sensors that have been designed and constructed along the size of the pumps to watch the temperature of each bearing individually.
The 18m long pumps incorporate a supporting system of brackets that Amarinth has designed which attaches each pump to its tank throughout installation guaranteeing that because the pump is lowered into the tank it stays perfectly aligned, decreasing vibration and put on throughout operation.
Once assembled, the pumps were independently witness examined and authorized by DNV at Amarinth’s facility in Rendlesham, UK. The pumps were then disassembled into 3m segments and shipped to Singapore the place the FPSO (floating manufacturing storage and offloading unit) is being constructed.
The pump delivery and installation needed to align with the FPSO construct schedule. Because of the length of the pumps, they had to be put in into the vessel’s tanks via the deck before one other deck above the pumps could possibly be built. The first section was accomplished efficiently over the Christmas interval with Amarinth’s Engineering Commissioning team supporting the shopper with the set up and commissioning.
The FPSO will be positioned within the KG-DWN 98/2 subject, approximately 22 km off the east coast of Kakinada, India. The vessel is designed to supply as much as ninety 000 barrels of oil per day (BOPD) and have a 1.3-million-barrel storage facility. It might be geared up to deal with the monsoon conditions prevalent on the subject.
Share