Float switch: What is it and so how exactly does it really work?

Float switches are simple, universally applicable and exceptionally reliable. It is not a coincidence that, today, float switches still represent probably the most commonly used principle for level monitoring. But diaphragm seal how exactly does a float switch really work?
Float switches, in a simple mechanical form, have already been in use for the control of water flows in mills and fields for centuries and today still represent probably the most commonly used technology. A hollow body (float), due to its low density and buoyancy, lifts or drops with the rising and, respectively, falling degree of the liquid. If one uses this movement via a mechanical lever, e.g. as a simple flap control for an irrigation channel, you have implemented a mechanical float switch.
Modern float switches, needless to say, are used for switching an electric circuit and show a clearly more sophisticated design. In its simplest form, a float switch includes a hollow float body with an integral magnet, a guide tube to steer the float, adjusting collars to limit the travel of the float on the tube and a reed contact located on its inside (see figure).
Figure: Selection of reed contacts of a float switch
How does the float switch function?
Reed contacts (see figure) of a float switch feature contact leaves within the hermetically sealed glass body, which move together or aside from each other whenever a magnetic field is applied. In the case of a float switch with a reed connection with a normally open function, on applying a magnetic field, the leaves are brought into contact. When the contact between your leaves is made, a current can flow via the closed leaves and a switching signal will be detected.
Regarding a float switch with normally closed switching function, the contact or circuit is interrupted on applying a magnetic field. If one selects a change-over contact, the glass capsule will contain three contact leaves, with which, constantly, a normally closed and a normally open contact are simultaneously made in every operating state.
Since the contact leaves are under a mechanical preload, a magnetic field must be applied to ensure that the contact leaves close or open as a way to generate the required switching signal (monostability). The adjusting collars fitted by the product manufacturer serve as a limitation for the float body in the correct position, to ensure / maintain the desired switching signal on reaching the defined filling level.
How does one specify a float switch?
The following parameters ought to be defined:
Amount of switch contacts / switching outputs
Position and function of every switching output
Guide tube length
Electrical connection (e.g. PVC cable outlet)
Process connection
Material (stainless steel, plastic, ?)
Note
As a leading provider of float-based measurement technology solutions, WIKA has a wide variety of variants to meet up all of your application-specific requirements. ไดอะแฟรม ซีล can be found on the WIKA website. Your contact person will undoubtedly be pleased to help you on the selection of the appropriate product solution.

Scroll to Top