The invention of the pump itself was a major breakthrough for mankind. It significantly simplified the supply of drinking water. With growing demands for a well balanced water supply, largely free from pressure fluctuations, and at exactly the same time increasing demands on the power efficiency of buildings, pumps are actually making their contribution as booster pumps. What their task is, how they function and what pressure switches do in the process is explained briefly and succinctly in this article.
What exactly are booster pumps needed for?
A booster pump increases low water pressure and, with that, improves the flow rate. It provides an extra boost to bring the water pressure to the desired level. Booster pumps tend to be used in pipelines to improve the pressure therefore to go the liquid along to another pump, and also for pumping in residential houses or large commercial buildings. An expansion vessel can extend a pressure booster system. Through the use of this expansion vessel, the water pressure is additionally stabilised and thus improved.
Booster pumps functioning
The figure gives an overview of the different measuring points inside a pressure booster system:
1 Input pressure ? Pressure
2a Dry run protection ? Pressure
2b Dry run protection ? Level
3 Output pressure ? Pressure
4 Pump performance ? เกจวัดแรงดัน how exactly does a booster pump work?
Booster pumps are selected based on application demands. Rather than selecting one large pump, consider selecting multiple pumps with smaller horsepower. Booster pumps have an impeller that moves water that comes in through the inlet and exits through the outlet. A motor makes the impellers spin. The pumps differ in how they draw the water in and push it out. Some of them work with a spinning propeller, others use an oscillating diaphragm or other pump principles.
What do mechanical pressure switches in booster pumps do?
The mechanical pressure switches in booster pumps are employed for the direct control/monitoring of safety functions so as to protect pumps with insufficient input pressure against dry running. A good example of this can be the WIKA PSM-520 pressure switch.
How do mechanical pressure switches work?
The pressure element of the switch is really a resilient bellow which works against a spring mechanism with an adjustable pre-load force. On the spring mechanism you will find a contact arm for actuating the change-over switch contact. The switch is actuated as soon as the force generated by the pressure in the pressure element is higher than the set pre-load force.
Note
Further information on the many measurement solutions which you can expect you for pumps and systems are available on the WIKA website. In case you have any questions, your contact will gladly help you.
Also read our articles
Mechanical pressure switches: So how exactly does one set the switch point?
Mechanical vs. electronic pressure switches: Functionality
Further blog posts on mechanical pressure switches